Victron SmallBMS f/Smart LiFePO4 Batteries w/M8

Special Price $52.96 Regular Price $58.00
In stock
Only 6 left

SmallBMS for Smart LiFePO4 Batteries with M8

SmallBMS for Smart LiFePO4 Batteries with M8

A simple and low-cost alternative to the VE.Bus BMS. The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface.

The smallBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular connectors. The smallBMS has three outputs, similar to the VE.Bus BMS. Load Disconnect output The Load output is normally high and becomes free-floating in case of the cell under voltage (default 2,8V/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 1A. The Load output is not short-circuit protected.

The Load output can be used to control:

  • A high current relay or contactor.
  • The remote on/off the input of a Battery Protect, inverter or DC-DC converter, or other loads.

Pre-alarm output

The pre-alarm output is normally free-floating and becomes high in case of the imminent cell under voltage (default 3,1V/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected).

The minimum delay between pre-alarm and load disconnect is 30 seconds.

Charge disconnect output

The Charger output is normally high and becomes free-floating in case of imminent cell overvoltage or over-temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil. 

The Charger output can be used to control:

  • The remote on/off of a charger
  • A Cyrix-Li-Charge relay
  • A Cyrix-Li-ct Battery Combiner

System on/off input

The system on/off input controls both outputs. When off, both outputs will be free floating so that loads and chargers are turned off. The System on/off consists of two terminals: Remote L and Remote H. A remote on/off switch or relay contact can be connected between L and H. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus.

Protects 12V, 24V and 48V systems

Operating voltage range: 8 to 70V DC.

LED indicators:

  • Load ON (blue): Load output high (cell voltage >2.8V, adjustable on the battery).
  • Temp or OVP (red): Charger output free floating (due to cell over temperature (>50°C), cell under temperature (<5 °C) or cell over voltage).
Please contact your dealer for any returns, repairs or support issues related to this product.
Specifications

Shipping Information

Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship.

Returns Policy

If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return.

Warranty

Most products come with a warranty offered by the manufacturer. Please consult the manufacturer’s warranty for details. For any products that arrive scratched, bent, or dented, Anything Boating will replace upon thorough inspection.


Did you find what you were looking for?
Customer Reviews

0

0 reviews

Write a review

Share your thoughts with other customers

Top customer reviews

No reviews

Write Your Own Review
You're reviewing:Victron SmallBMS f/Smart LiFePO4 Batteries w/M8
Your Rating
© 2024 Anything Boating. All Rights Reserved.