T-Top Standoff Pack (pair)
Estimated Delivery: - *Continental US Only
For the Fisherman that needs a little extra stability, our T-Top standoff pack is here for you. These are the same standoffs that come standard with each Fishmaster T-Top.
For the Fisherman that needs a little extra stability, fishmaster t-top standoffs are the solution. These are the same standoffs that come standard with each Fishmaster T-Top. The standoffs add strength and stability on skiffs, inflatables, RIBs, and other center console boats with consoles under 30" tall.
Designed for a universal fit, these standoffs work with Fishmaster t-tops as well as any other brand of center console t-top. Multiple spacers are included to achieve a perfect fit on your t-top. These standoffs are made from high-quality 304 stainless steel rods with plastic acetyl inserts for spacing.
To install the standoffs, simply mark your installation point, drill a small hole into your console, cut your standoff to length, and attach with the included hardware. We recommend you use anti-seize material to avoid future problems with nuts and bolts.
| Universal design makes theses compatible with any brand of center console t-tops. |
| 304 stainless steel rods with plastic acetyl inserts for spacing. Multiple spacers are included with each product to achieve the custom fit. |
| Normally only needed for consoles under 30" tall. |
| Simple DIY installation. |
| We recommend you use anti-seize material to avoid future problems on bolts and nuts. |
Video Transcription:The Fishmaster standoffs are designed to go from the top side up right legs into the console to provide extra stability for the ttop. The standoffs can be used on the front leg, rear, leg, or crossbar, or the side of right leg. To install your standoffs, determine where you want the standoff to go and mark it with a sharpie pen, use a hammer and a towel to start the hole where you're going to drill. Drill through the side, upright and into the console. Measure the distance between the console and the right leg. Cut the standoff sleeve to the appropriate length. Insert the bolt through the side upright and into the console as shown inside the console, you'll attach a large in washer and a nut tightened the standoff bolt as tight as possible. Your standoff installation for one side is complete. Repeat the same process on the opposite side. Now drill through the side upright and into the console.
-
T-Top Stabilizer Bar$109.99 -
T-Top Vertical Brace StandoffsAs low as $154.99 -
Deck Mounted Grab Bar$129.00
Shipping Information
Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship.
Returns Policy
If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return.
Warranty
Most products come with a warranty offered by the manufacturer. Please consult the manufacturer’s warranty for details. For any products that arrive scratched, bent, or dented, Anything Boating will replace upon thorough inspection.
0
Share your thoughts with other customers
Top customer reviews
No reviews